|
|
 |
Optical
Power Meters
The ML9002A is a compact handy power meter with
a measurement level as wide as other more expensive
instruments.
|
 |
The ML9001A is a single channel
digital display optical power meter. It ensures
accuracy and linearity over a wide wavelength range
and greatly improves measurement reliability. |
 |
The ML910B provides two independent channels
and advanced functions, enabling a variety of
sophisticated optical power measurements.
>>
back to top
|
|
|
|
|
Optical
Spectrum Analyzers
|
The MS9710C provides excellent wavelength accuracy,
waveform shape and new features. This OSA is an improved
version of the well received MS9710B and features improved
wavelength accuracy, resolution bandwidth and signal
to noise averaging.
The MS9715A is a measuring instrument for use in system
manufacture, construction, and maintenance.
- Ease of operation
- Long time mode for maintaining and monitoring DWDM
systems
- Measurement items include wavelength, level, OSNR,
channel spacing, gain tilt, gain slope, etc.
- Both graphical and tabulated data of a multichannel
system is available
>> back
to top
|
|
|
|
Optical
Light Sources
The Anritsu MG9587A provides a stable source of light
over a wide wavelength range of more than 200 nm. It
incorporates highly accurate control of the Super Luminescence
Diode source, realizing a high output level and stability.
The MG9001A/9002A can be used as stabilized light sources
for different applications by changing the light source
units. In particular, they have been designed for a
high output stability of 0.02 dB. The MG9001A can hold
2 LED light source units.
The MT9812B is a nine channel mainframe providing high
accuracy and reliable applications for the evaluation
of various optical devices and systems including WDM.
The Anritsu MG9587A provides a stable source of light
over a wide wavelength range of more than 200 nm.
>> back
to top
|
|
|
|
Optical
Attenuators
|
The MN9625A/9626A Programmable
Optical Attenuators have excellent attenuation performance.
They are calibrated with a high- ccuracy calibration system
over an attenuation range of 0 to 60dB.
The MN924C and MN9605C are high-precision optical attenuators
designed for use with single mode optical fibers. A
combined step attenuator and continuous attenuator permit
highly accurate attenuation adjustment.
The MP922B is a bare fiber connector using a V shaped
groove to temporarily and quickly connected optical
fiber cores. The V-groove and fiber alignment can be
observed with the attached microscope. This permits
fine control of distance between optical fiber end surfaces,
and allows low loss single mode fiber connection. The
MP922B is ideal for the measurement of bare fiber when
using an OTDR.
>> back
to top
|
|
|
|
The MN9604C is used in combination with stabilized
light source and optical power meter to measure optical
return loss of optical connectors at approximately 50
dB.
With the MA9013A Fiber Adapter, bare fiber connections
can be made quickly and easily. The device, engineered
to allow fiber core connections without need for polishing,
is especially useful for simple temporary instrument
connections during on-site operations. Moreover, the
high precision ferrule facilitates low-loss single mode
and multi-mode fiber connections.
>> back
to top
|
|
|
 |
|
VXIbus Optical Switch Modules
|
1260-82C/D/F- Single Slot
1x2
1260-822 - Single Slot 2x2
1260-84A - Single Slot 1x4
1260-84B - Dual Slot 1x4
1260-88A - Single Slot 1x8
1260-88B - Dual Slot 1x8
- High Repeatability for Accurate Testing
- Ideal for SONET Test, Fiber Optic Component Test,
and Fiber Network Monitoring
- Single or Dual, 1 x 4, 1 x 8,
or 2 x 2 Optical Switching
>> back
to top
|
|
|
